Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Glendale?
Spring replacement in Glendale typically costs $180 – $340 for a single torsion or extension spring, and most homeowners pay that for one spring replaced. If both springs on your door are the same age, they usually get replaced as a matched pair, which runs about twice that range. The written estimate you get after we look at your door sets the final price, and the estimate itself is free.
We’re Pearl Garage Door Repair, and a broken spring is one of the few garage door failures you should treat as urgent. The door won’t balance safely, and forcing the opener to lift it can damage the motor and the panels. Our technicians have up to 14 years of experience with the major brands installed on Glendale homes, including LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. We work on the door and the opener together, because they fail together.
Key Takeaways
- One spring: typically $180 – $340. A matched pair: roughly double that.
- Price depends on spring type, door weight, and whether the door is balanced correctly afterward.
- Glendale’s dry heat and heavy daily use both shorten spring life.
- Free estimates, and the written quote is the price.
- Call (877) 490-7828. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Spring Replacement Cost Breakdown (2026)
Here’s what the line items look like for a typical spring job in Glendale this year. These are estimated ranges for the market, not a fixed price list. Your written estimate will reflect your specific door.
| Item | Typical Estimated Range |
|---|---|
| Single spring replacement (torsion or extension) | $180 – $340 |
| Matched pair of springs | About twice the single-spring range |
| Cable repair (often needed with a spring failure) | $130 – $250 |
| Roller replacement (worn rollers worsen balance) | $110 – $220 |
| Track realignment (if the door jumped the track) | $120 – $240 |
| Panel replacement (if a panel was damaged) | $250 – $500 |
| Opener repair (if the opener was strained) | $120 – $320 |
| Full garage door repair (a broader job) | $150 – $600 |
| New door installation (if the door is past repair) | $700 – $2,200 |
What moves the number up or down? The spring type is the biggest factor. Torsion springs, mounted on the shaft above the door, generally cost more than extension springs, which run along the horizontal tracks. A heavy or oversized door needs springs rated for more cycles, which costs more. If the spring failure took a cable, a track, or a panel with it, you’ll see those line items added. And if the door is badly out of balance, our technician will spend more time dialing in the tension so the door sits correctly and the opener isn’t straining.
For anything beyond the spring itself, the related ranges are here: garage door repair covers the general repair side, garage door cable repair handles the cables that so often go at the same time, and garage door roller replacement is the quiet fix that keeps the door balanced and quiet. If your opener got punished by a door that wouldn’t lift cleanly, garage door opener repair covers that, and if the door itself is beyond saving, garage door installation is where the conversation goes.
What Affects Spring Replacement Pricing in Glendale
- Spring type and count. A single torsion spring is at the low end of the range. A matched pair, which we usually recommend when both springs are the same age and condition, costs about twice a single spring. Extension springs are typically cheaper to replace than torsion springs.
- Door weight and size. A standard single-car door needs lighter springs than a double-car door or a heavily insulated model. The spring has to be matched to the door’s actual weight, and heavier doors need heavier-rated springs.
- Glendale’s heat and dust. The desert climate matters here. High summer temperatures and dry air work on steel springs and the grease packed into them, and the fine dust that blows through the West Valley can settle into torsion hardware and speed up wear. Springs that see this climate plus daily use tend to cycle out sooner than you’d expect.
- Daily use. A door that opens and closes several times a day, like a busy family’s door in Glendale, wears through spring cycles faster than a door used once a day. Spring life is measured in cycles, not years, so how often you use it is a real price driver.
- Related damage. When a spring snaps, it can whip a cable, bend a track, or drop a panel. If any of that happened, the repair grows. A technician who checks the whole system up front finds these before they turn into a second visit.
- Brand and hardware. Doors from Clopay, Amarr, Wayne Dalton, Raynor, and similar manufacturers use specific spring and hardware setups. Familiarity with the brand means the right parts and a cleaner job, which keeps the price honest.
For the full picture of what we do across the city, see our Glendale page.
How to Save on Spring Replacement
You can’t make a broken spring cheaper by waiting, but you can avoid paying for things you don’t need.
- Replace the pair when they’re the same age. It sounds like spending more, but replacing one spring while its twin is the same age usually means paying for two separate visits instead of one. Ask the technician whether a pair makes sense for your door.
- Get the free estimate first. We quote before we start, and the written estimate sets the price. Call (877) 490-7828 and we’ll book a time.
- Ask them to check balance and rollers while they’re in there. A door that’s out of balance wears its springs faster. Catching a worn roller during a spring job is cheaper than a separate call.
- Don’t run the opener on a broken spring. It strains the motor and can turn a spring job into an opener repair too. Leave the door down until a technician looks at it.
- Fix the small stuff before it spreads. A door that’s been noisy or slow for weeks is telling you something. A quick look now is cheaper than a panel or track repair later.
A Word on Safety
Torsion springs and the cables under them are under heavy tension. They can release suddenly and cause serious injury, and this is not a job to attempt yourself. A trained technician uses the right winding bars and knows how to release and re-tension safely. Please leave spring work to a professional.
Can You Repair Just One Spring, or Do You Need Both?
You can replace just one spring, and some homeowners do. But when both springs are the same age and one has failed, the second is usually close behind it. Replacing both at once costs about twice the single-spring range in one visit, which is often less than paying for two separate jobs weeks apart. Our technician will tell you what shape the second spring is in and let you decide. We work on whatever is already on your door, whether that’s a LiftMaster, Chamberlain, or Genie opener above it or a Clopay, Amarr, Wayne Dalton, Craftsman, or Raynor door in front of you.
How Long Does Spring Replacement Take?
A single-spring replacement is usually a same-day job, often finished within a couple of hours once the technician is on site. A pair, or a job that includes cable or track work, can take longer. We answer 24/7 and dispatch from 7am to 7pm, Sunday through Friday. Call (877) 490-7828 for an exact quote, and the estimate is free.
FAQs – Spring Replacement Cost
How much does garage door spring replacement cost in Glendale?
Spring replacement in Glendale typically runs $180 – $340 for a single spring, and about twice that for a matched pair. The written estimate sets the final price. Call (877) 490-7828 for an exact quote, and the estimate is free.
Is it cheaper to repair or replace a garage door with a broken spring?
Repair is almost always cheaper when the door itself is sound. A spring replacement sits in the $180 – $340 range for one spring, while a new door installation runs $700 – $2,200. Replace the door only when the panels, tracks, or structure are failing too. Call (877) 490-7828 and we’ll tell you honestly which side your door falls on.
How much does a broken spring cost to fix if the cables also need work?
If a spring failure took a cable with it, expect the spring range plus cable repair at $130 – $250. Combined jobs are common, and bundling them into one visit is usually cheaper than two separate calls. Call (877) 490-7828 for an exact quote, and the estimate is free.
Can you come today for a broken spring?
Often, yes. Same-day service is available for spring failures, and we dispatch from 7am to 7pm, Sunday through Friday. Call (877) 490-7828. We answer 24/7. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Why did my spring break in Glendale’s heat?
Glendale’s high summer temperatures and dry air wear on steel springs and the grease inside them, and daily use adds cycles fast. Spring life is measured in cycles, not years, so a busy door in the desert can wear out sooner than you’d expect. Call (877) 490-7828 to book a free estimate and we’ll check the balance and hardware while we’re there.
When your door won’t lift and you’re not sure what’s wrong, it’s worth checking both the garage door spring repair side and the opener, since the two can fail together. If the opener’s the culprit, garage door opener installation or a repair visit handles it. And if a panel took the hit when the spring went, garage door panel replacement covers that repair.
Ready to get it fixed right? Call (877) 490-7828 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Our technicians have up to 14 years of experience, and we work on the door and the opener together, so you don’t need a second company.
Pricing reflects the Glendale market as of 2026. Pearl Garage Door Repair offers free estimates – call (877) 490-7828.
Written by the team at Pearl Garage Door Repair.
What Our Customers Say
"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
- Marisol Reyes"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Yolanda Delgado"Spring snapped at six in the morning with my car sealed inside and me due at work. Somebody was here by eight thirty and had it fixed that morning. Door's quieter now than it was before it broke."
- Eduardo Morales